# Using Libre2 sensors on xDrip+ in the UK

**URL:** <https://forum.fudiabetes.org/t/using-libre2-sensors-on-xdrip-in-the-uk/11614>\
**Category:** Type 1 & LADA\
**Created:** [July 20, 2021, 6:38pm UTC](https://forum.fudiabetes.org/t/using-libre2-sensors-on-xdrip-in-the-uk/11614 "2021-07-20T18:38:37Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![john\_coburg](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/john_coburg/32/8538_2.png) [@john\_coburg](https://forum.fudiabetes.org/u/john_coburg)\
**Post date:** [August 4, 2021, 1:39pm UTC](https://forum.fudiabetes.org/t/using-libre2-sensors-on-xdrip-in-the-uk/11614/16 "2021-08-04T13:39:25Z")

</div>

Hello there @Trying. I hope all is well with you! As you can tell, I had a few days off from this as it was giving me a bit of a headache… but feel i really need to get it done, as i want to start using these Libre2 sensors and stop relying on this extra bit of hardware on my arm (the miaomiao, which needs charging with a unique cable every 7d, making it very easy to get caught out when travelling etc…)

I think i got as far as downloading everything, but switching the cmd window to the GnuWin32\bin directory and then attempting to run it (which i think was your suggestion?) doesn’t seem to yield any results.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/fudiabetes/original/2X/d/d9ded36381463e0a68a9bcd776e9b07332f78d0f.png)

I think you also also mentioned i might not have installed gnu fully/correctly…but i’m not sure how we check this?

I’m sorry for being a pain on this, but i’m really struggling with these GitHub instructions, and really don’t know where else to turn. Thank you so much for your patience!

---

_[View the full topic](https://forum.fudiabetes.org/t/using-libre2-sensors-on-xdrip-in-the-uk/11614)._