# Proper Priming Technique for Pens

**URL:** <https://forum.fudiabetes.org/t/proper-priming-technique-for-pens/4880>\
**Category:** Type 1 & LADA\
**Created:** [August 31, 2018, 4:37am UTC](https://forum.fudiabetes.org/t/proper-priming-technique-for-pens/4880 "2018-08-31T04:37:59Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nickyghaleb](https://avatars.discourse-cdn.com/v4/letter/n/5f8ce5/32.png) [@Nickyghaleb](https://forum.fudiabetes.org/u/Nickyghaleb)\
**Post date:** [August 31, 2018, 4:38am UTC](https://forum.fudiabetes.org/t/proper-priming-technique-for-pens/4880/1 "2018-08-31T04:38:00Z")

</div>

I’m doing a Levemir pen injection at 8:00 tomorrow morning and have been given strict instructions to “prime carefully” but don’t even know how to prime “poorly”. If anyone out there is able to give a quick answer before 8 tomorrow morning, it would be appreciated. I’m sure I can find something online if not…

---

<div class="post-metadata">

**Author:** ![Eric](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/eric/32/9209_2.png) [@Eric](https://forum.fudiabetes.org/u/Eric)\
**Post date:** [August 31, 2018, 4:52am UTC](https://forum.fudiabetes.org/t/proper-priming-technique-for-pens/4880/2 "2018-08-31T04:52:05Z")

</div>

There are a couple of threads about this. Prime **down** is my main point. Here is one mention of it.

> [@Need for 1/2 unit syringes and needle length selection in Toddlers](https://forum.fudiabetes.org/t/need-for-1-2-unit-syringes-and-needle-length-selection-in-toddlers/4318/13):
>
> @T1Allison Real quick - point the needle down when priming!! If you prime pointing up, insulin drips on the barrel of the needle. Then when you inject, that insulin drops back onto the surface of your skin, and you are not sure if you had a leak. If you already know this, please forgive my mentioning it! Prime down, not up!!!

---

<div class="post-metadata">

**Author:** ![Nickyghaleb](https://avatars.discourse-cdn.com/v4/letter/n/5f8ce5/32.png) [@Nickyghaleb](https://forum.fudiabetes.org/u/Nickyghaleb)\
**Post date:** [August 31, 2018, 4:58am UTC](https://forum.fudiabetes.org/t/proper-priming-technique-for-pens/4880/3 "2018-08-31T04:58:27Z")

</div>

> [@Eric](#):
>
> There are a couple of threads about this. Prime **down** is my main point. Here is one mention of it.

Thank you, Eric. And now go to bed. Just put your stuff down… and go to bed. 😁

Thank you, and I’ll take a look. I’m sure I’ll be bugging you at first light, so rest up. 😁

---

<div class="post-metadata">

**Author:** ![Beacher](https://avatars.discourse-cdn.com/v4/letter/b/a6a055/32.png) [@Beacher](https://forum.fudiabetes.org/u/Beacher)\
**Post date:** [August 31, 2018, 12:34pm UTC](https://forum.fudiabetes.org/t/proper-priming-technique-for-pens/4880/4 "2018-08-31T12:34:30Z")

</div>

> [@Eric](#):
>
> point the needle down when priming!!

Or … prime with the needle pointing up and then give the pen/syringe a little flick with your finger to fling off any insulin clinging to the needle or barrel.

Priming up theoretically also gets rid of any air bubbles in the pen cartridge, though there’s also a theory that the pen needle goes in deeper than where bubbles would rise to.

Anyway, I learned the flick thing when I was taught to do injections at the age of 9 – same purpose, so you didn’t panic if you saw insulin on the skin after your injection.