# ISIG and Calibration Factor: Using my Sensor Raw Data as part of Blood Sugar Management:

**URL:** <https://forum.fudiabetes.org/t/isig-and-calibration-factor-using-my-sensor-raw-data-as-part-of-blood-sugar-management/4099>\
**Category:** Type 1 & LADA\
**Created:** [May 26, 2018, 12:19am UTC](https://forum.fudiabetes.org/t/isig-and-calibration-factor-using-my-sensor-raw-data-as-part-of-blood-sugar-management/4099 "2018-05-26T00:19:57Z")\
**Posts on this page:** 1\
**Page:** 3

<div class="post-metadata">

**Author:** ![Nickyghaleb](https://avatars.discourse-cdn.com/v4/letter/n/5f8ce5/32.png) [@Nickyghaleb](https://forum.fudiabetes.org/u/Nickyghaleb)\
**Post date:** [December 1, 2018, 11:50pm UTC](https://forum.fudiabetes.org/t/isig-and-calibration-factor-using-my-sensor-raw-data-as-part-of-blood-sugar-management/4099/41 "2018-12-01T23:50:36Z")

</div>

> [@Mamastayzfresh](#):
>
> Can you explain the correction factor a bit? I’m confused. Are you meaning how much 1u adjusts my BG? Or something else.

Hi again! 🙂

Okay, so first off, we’re mixing two different terms: _correction factors_ and _calibration factors_. Correction factor _is_ how much a unit of insulin will lower your blood sugar, just as you suggested. (Other, smarter people here at FUD, if I’ve misspoken, correct if you will). 😃

The _calibration factor_ is what I refer to in this thread. It is only a thing with Medtronic, whereas the correction factor is a general diabetic concept.

> [@Mamastayzfresh](#):
>
> I had the enlite for the last 4 years and this is the first time I’ve ever heard of ISIG, and the BG/ISIG formula.

This pertains to the calibration factor, and I have no idea why they choose to mention it when they do, but it appears to be completely a random bit of information some Medtronic reps offer. I think I’ve made 850 calls into Medtronic and have maybe had 3 reps ever mention it to me.

I know you’ve gotten your 670G, and I will tell you that even if you’ve never calculated it before, it might be something worth understanding now. With the old sensors, there was a general guideline of calibrations needing to occur within a range of 3 (I can’t remember if it’s 2 or 3, but that’s not a common one anyway) -8. So 3-8. I believe the vast majority of our factors naturally occur within that range, so it was never much of a problem. On the 670G, however, it becomes a very strict rule. Manual mode is more forgiving and holds a wider range of 3-10. Auto Mode, however, holds you to 8. And if you try calibrating outside of that range, it’ll tell you it’s not accepted, and if you collect _2 of those_, you’re told to change your sensor. There are really two rules that are worth learning as you start out, and the other one is the 35% rule. Understanding these things can really help you avoid a lot of problems and give you a shot at getting more out of your sensors.

_Hopefully_ you’ll jump right in and have some luck with it and never need to look at these rules again. If you find you’re struggling though, this would be a good place to start. I see you’ve joined the Honest Exchange, and I wanted to let you know you can tap me if you need anything at all. Either here or there. It can be kind of a tough transition, and I’d be more than happy to help you get some information to make it a little easier.

[Previous page](https://forum.fudiabetes.org/t/isig-and-calibration-factor-using-my-sensor-raw-data-as-part-of-blood-sugar-management/4099.md?page=2)
