# G7 15 day feedback request

**URL:** <https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411>\
**Category:** Type 1 & LADA\
**Created:** [October 6, 2026, 7:35pm UTC](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411 "2026-10-06T19:35:26Z")\
**Posts on this page:** 8\
**Page:** 2

<div class="post-metadata">

**Author:** ![Abigail](https://avatars.discourse-cdn.com/v4/letter/a/a587f6/32.png) [@Abigail](https://forum.fudiabetes.org/u/Abigail)\
**Post date:** [November 10, 2026, 4:22am UTC](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411/21 "2026-11-10T04:22:42Z")

</div>

That’s a fair point. The app collects sensor data, but support may still need to verify details and troubleshoot the issue before approving a replacement.

---

<div class="post-metadata">

**Author:** ![drbbennett](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/drbbennett/32/604_2.png) [@drbbennett](https://forum.fudiabetes.org/u/drbbennett)\
**Post date:** [November 10, 2026, 1:56pm UTC](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411/22 "2026-11-10T13:56:49Z")

</div>

Inherent problem with casual patient reviews is that negatives tend to outnumber positives because people who have problems are more motivated to post about it. I certainly saw enough that made me reluctant to upgrade from G6 until back in July when my distributor stopped supplying them. I figured I might as well try the 15 day since who likes having to change these things and if I gotta I might as well go for it. My experience has been very positive overall. My second sensor was too erratic and had to be swapped out, other than that no problems at all. It turned out to have been a bleeder, so that may have been the issue rather than the sensor itself.

- Accuracy: it seems noticeably better than what I was used to with G6
- Longevity: all my sensors bar that one have gone the full 15 days, meaning the adhesive has lasted the whole time as well, the thing I was most skeptical about.
- Warm up time: no interruption if you do it right. Key thing is that the sensor period initiates from the moment you insert the sensor even if you don’t pair it until hours later. So you wait until the old one’s grace period starts to insert the new one. I screwed this up a couple times because I was always trying to maximize pre-soak time with the G6, so I inserted the new one when I saw the “24 hours remaining in your sensor session” alert. Just means you end up a little short of the full 15 days so not a catastrophe, but if you wait until the “grace period started” alert to insert the new one the overlap times equal out and you get the full benefit. At the end of 12 hours you pair the new one and it “knows” it’s already completed warm-up so away you go. I get a little lag from the Tandem side but only five minutes or so until it takes the next reading
- Connectivity. I have seen more dropouts, but only from the pump (T-Slim) connection not from the phone app. This was an issue with the G6 too, but it’s a little worse. You wouldn’t think your body could present that much of an obstacle but it does. I usually keep the pump in a t-shirt pocket with the sensor on my left arm, but still have to sometimes take the thing out and just hold it right on top of the dang sensor in order to get back to sleep (9/10 times it happens overnight). When it’s on the right arm I just try to position the pump right next to it on the bed. Not great, but like I say the app connection rarely drops out so I’m not losing data on my Fitbit or other dependencies.

---

<div class="post-metadata">

**Author:** ![James.J.Igoe](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/james.j.igoe/32/12517_2.png) [@James.J.Igoe](https://forum.fudiabetes.org/u/James.J.Igoe)\
**Post date:** [November 10, 2026, 2:25pm UTC](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411/23 "2026-11-10T14:25:24Z")

</div>

I enjoy the 15-day lifespan of the sensor, but initially found that the sensors failed early when I wore them on my abdomen, so I have switched to only wearing them on the back of my arms. The cause might not be the sensor, but my vigorous rowing ergometer workouts. Regardless of why, that seems to have solved the problem for now, although I am a side sleeper and tricep placement sometimes leads to compression lows or blocking the sensor, which then results in my Omnipod insulin pump being unable to communicate with the sensor, resulting in alarms. When I switch to training for cross-country (Nordic) skiing in December, I can test out abdominal placement, since those workouts won’t flex my abdominal area so much, similarly so for biking-focused workouts in the summer.

One issue that is a problem for me, unrelated to the sensor itself, is timing to avoid wasting insulin pump pods, which normally last 3 days with an eight (8) hour grace period. If everything worked perfectly, I would get 5 pods per sensor, but there are times I use the 8-hour grace period or a sensor fails early, leading to imperfect replacement timing. Recently, I switched sensor sides while the pod was on the other side of my abdomen and was surprised it went well, with no dropouts in communication between the sensor and pod.

---

<div class="post-metadata">

**Author:** ![CatLady](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/catlady/32/36_2.png) [@CatLady](https://forum.fudiabetes.org/u/CatLady)\
**Post date:** [November 10, 2026, 3:14pm UTC](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411/24 "2026-11-10T15:14:25Z")

</div>

> [@drbbennett](#):
>
> - At the end of 12 hours you pair the new one and it “knows” it’s already completed warm-up so away you go.

Do you think that this improves the accuracy of the new sensor? I’m using the G7 10 day and the first 12 hours are always wonky and the one I started Sunday afternoon took over 24 hours to settle in. 😬

---

<div class="post-metadata">

**Author:** ![drbbennett](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/drbbennett/32/604_2.png) [@drbbennett](https://forum.fudiabetes.org/u/drbbennett)\
**Post date:** [November 10, 2026, 3:58pm UTC](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411/25 "2026-11-10T15:58:16Z")

</div>

> [@CatLady](#):
>
> Do you think that this improves the accuracy of the new sensor?

I don’t really have a point of comparison because I always do it. I’ve heard the pre-soak is less of a big deal with the new sensors but it’s my habit for so long I’m not inclined to change. And I’ve never experienced initial day flakiness with the G7-15 except that one time. I used to try to do 24 hours with the G6 but only doing 12 (or so) to coincide with the grace period seems to work fine. My other G6 habit that I still do is to take a fingerstick reading for comparison at session start and calibrate if it’s too far off. This is contrary to Dexcom’s rubric but for me anyway these things just always seem to come out of warm up 20-30 units high and I just don’t have the patience to leave it to sort itself on its own when I know it’s wrong and my AID system is using that info for delivery. They always seem to accept the calibration and register fine from then on.

---

<div class="post-metadata">

**Author:** ![jbowler](https://avatars.discourse-cdn.com/v4/letter/j/e274bd/32.png) [@jbowler](https://forum.fudiabetes.org/u/jbowler)\
**Post date:** [November 10, 2026, 11:38pm UTC](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411/26 "2026-11-10T23:38:22Z")

</div>

> [@James.J.Igoe](#):
>
> timing to avoid wasting insulin pump pods

I had thought, given the discussions that I have seen, that it is possible to swap a running O5 'pod to a _new_ sensor. Is that incorrect?

---

<div class="post-metadata">

**Author:** ![James.J.Igoe](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/james.j.igoe/32/12517_2.png) [@James.J.Igoe](https://forum.fudiabetes.org/u/James.J.Igoe)\
**Post date:** [November 10, 2026, 11:57pm UTC](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411/27 "2026-11-10T23:57:07Z")

</div>

Yes, absolutely right, but the issue for me has to do with aligning the pod and sensor on the same side of the body. Currently, I always put the pod on the abdomen and the sensor on the back of my arm. Although it can work to have the sensor and pod on different sides - as I mentioned - it is not recommended,

---

<div class="post-metadata">

**Author:** ![jbowler](https://avatars.discourse-cdn.com/v4/letter/j/e274bd/32.png) [@jbowler](https://forum.fudiabetes.org/u/jbowler)\
**Post date:** [November 11, 2026, 12:50am UTC](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411/28 "2026-11-11T00:50:26Z")

</div>

> [@James.J.Igoe](#):
>
> Currently, I always put the pod on the abdomen and the sensor on the back of my arm.

Further apart may help. I’ve been using “off-list” placements for the 'pod (Dash in my case, so indirect connection to the G7). I’m not sure it helps that much. The restricted placement sites for the Dexcom and for the 'pod pretty much mean the two have to communicate through a lot of our flesh which, famously, is 90% water.

My intuition from the various reports I’ve read is that new pod-\>G7, something that happens at least 3 times per G7, is the problem area. New pod-\>new G7 is less of a deal possibly because it happens less often.

Maybe I could patent an implantable bluetooth repeater.

[Previous page](https://forum.fudiabetes.org/t/g7-15-day-feedback-request/16411.md?page=1)
