# Any way to get the decimal points back on Clarity "time in range" measure?

**URL:** <https://forum.fudiabetes.org/t/any-way-to-get-the-decimal-points-back-on-clarity-time-in-range-measure/518>\
**Category:** Tips, Tech & Gear\
**Tags:** cgm, trends\
**Created:** [April 17, 2017, 2:12pm UTC](https://forum.fudiabetes.org/t/any-way-to-get-the-decimal-points-back-on-clarity-time-in-range-measure/518 "2017-04-17T14:12:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![TiaG](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/tiag/32/594_2.png) [@TiaG](https://forum.fudiabetes.org/u/TiaG)\
**Post date:** [April 17, 2017, 2:12pm UTC](https://forum.fudiabetes.org/t/any-way-to-get-the-decimal-points-back-on-clarity-time-in-range-measure/518/1 "2017-04-17T14:12:25Z")

</div>

Clarity recently updated the look of its data reporting, so that the time spent urgent low, low, in range and high now look slightly different:  
 ![](https://canada1.discourse-cdn.com/flex030/uploads/fudiabetes/original/1X/9ca3691638d5b30de530518a90e23a4269ab379e.png)  
The problem is that they’re now rounding the decimals, which is a problem for us. I use less than 0.5% of the time \<55 mg/dL (my “urgent low” threshold) as one of the main targets for avoiding lows. Now it just says “0%.” But there’s a huge difference between 0.4% and 0% for this metric. Has anyone figured out a way to get this information back? I was looking at Night Scout data but it’s also rounding on its reports. Short of exporting all my data into Excel (a pain in the neck), any other ideas?

---

<div class="post-metadata">

**Author:** ![ClaudnDaye](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/claudndaye/32/5_2.png) [@ClaudnDaye](https://forum.fudiabetes.org/u/ClaudnDaye)\
**Post date:** [April 17, 2017, 2:25pm UTC](https://forum.fudiabetes.org/t/any-way-to-get-the-decimal-points-back-on-clarity-time-in-range-measure/518/2 "2017-04-17T14:25:37Z")

</div>

My wife and I were just looking at their new layout also and we can definitely tell this was made for adults in mind because small fractions matter to babies and toddlers.

We had 4 urgent lows this week but ours still shows 0% also. I’ve written to them to see if they can think about babies/toddlers when developing these things, or at the very least; provide the ability for the customer to decide the fraction level that make up those numbers.

---

<div class="post-metadata">

**Author:** ![Chris](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.fudiabetes.org/chris/32/382_2.png) [@Chris](https://forum.fudiabetes.org/u/Chris)\
**Post date:** [April 17, 2017, 2:43pm UTC](https://forum.fudiabetes.org/t/any-way-to-get-the-decimal-points-back-on-clarity-time-in-range-measure/518/3 "2017-04-17T14:43:39Z")

</div>

It is not ideal, but if you go to the daily or hourly statistics under statistics you can get more granular data. Not ideal, but better than a sharp stick in the eye.